Multi Axis Milling

Advanced Numerical Methods to Optimize Cutting Operations of Five Axis Milling Machines [Repost]

Advanced Numerical Methods to Optimize Cutting Operations of Five Axis Milling Machines (Springer Series in Advanced Manufacturing) by Weerachai Anotaipaiboon
English | Nov 25, 2010 | ISBN: 3642090222, 0073404691 | ASIN: 3540711201 | 206 Pages | PDF | 12 MB

This book presents new optimization algorithms designed to improve the efficiency of tool paths for five-axis NC machining of sculptured surfaces. The book covers both the structure of the SLAM problem in general and proposes a new extremely efficient approach.
Advanced Numerical Methods to Optimize Cutting Operations of Five Axis Milling Machines

Advanced Numerical Methods to Optimize Cutting Operations of Five Axis Milling Machines by Weerachai Anotaipaiboon
Springer | March 29, 2007 | English | ISBN: 0073404691 | 206 pages | PDF | 12 MB

This book presents new optimization algorithms designed to improve the efficiency of tool paths for five-axis NC machining of sculptured surfaces. The book covers both the structure of the SLAM problem in general and proposes a new extremely efficient approach. It can be used by undergraduate and graduate students and researchers in the field of NC machining and CAD/CAM as well as by corporate research groups for advanced optimization of cutting operations.

DeskProto 6.3571 Multi-Axis Edition (x86)  Software

Posted by Dizel_ at Aug. 3, 2013
DeskProto 6.3571 Multi-Axis Edition (x86)

DeskProto 6.3571 Multi-Axis Edition (x86) | 22 MB

DeskProto Multi-Axis: the Flagship edition, for 4-axis milling and 5-axis milling. Multi-Axis edition offers all Expert options plus four-axis and five-axis machining. In the Multi-Axis edition all DeskProto options are available. The result is a CAM program that allows you to produce even the most complicated models.

Pose-varied Multi-axis Optical Finishing Systems: Theory and Process Validation  eBooks & eLearning

Posted by ChrisRedfield at June 6, 2015
Pose-varied Multi-axis Optical Finishing Systems: Theory and Process Validation

Haobo Cheng - Pose-varied Multi-axis Optical Finishing Systems: Theory and Process Validation
Published: 2014-09-04 | ISBN: 3662441810 | PDF | 154 pages | 9.1 MB

CAD/CAM of Sculptured Surfaces on a Multi-Axis NC Machine: The DG/K-based Approach  eBooks & eLearning

Posted by step778 at March 26, 2015
CAD/CAM of Sculptured Surfaces on a Multi-Axis NC Machine: The DG/K-based Approach

Stephen Radzevich, "CAD/CAM of Sculptured Surfaces on a Multi-Axis NC Machine: The DG/K-based Approach"
2008 | pages: 124 | ISBN: 1598297651 | PDF | 7 mb

VERO EDGECAM 2016 R2  Software

Posted by Dizel_ at June 6, 2016
VERO EDGECAM 2016 R2

VERO EDGECAM 2016 R2 | 1.45 Gb

Edgecam is a market leading computer aided manufacturing (CAM) system for NC part programming. With unparalleled ease of use and sophisticated toolpath generation, it’s the only CAM system you’ll need for milling, turning and mill-turn machining. Edgecam utilises your in house knowledge and experience to drive the CAM process with automation tools to suit different applications - allowing you to maintain your competitive edge.

Delcam PartMaker 2015 R1 SP1  Software

Posted by Rare-1 at May 22, 2015
Delcam PartMaker 2015 R1 SP1

Delcam PartMaker 2015 R1 SP1 | 685.5 MB

PartMaker uses patented visual programming, which makes it possible to make the program faster and easier.This technique consists in the separation of complex parts to simple surgery. Each treated surface is programmed in a separate window, and subject to a visual simulation of the machine.

InventorCAM 2014 SP4  Software

Posted by scutter at Sept. 18, 2014
InventorCAM 2014 SP4

InventorCAM 2014 SP4 | 1.8 Gb

SolidCAM, the leaders in Integrated CAM, has released InventorCAM 2014, its integrated CAM solution for Autodesk Inventor. The new release has more than 100 new enhancements across all its modules: iMachining 2D and 3D, 2.5D Milling, HSS, HSR/HSM, Sim 5X, Turning, Advanced Mill-Turn for multi-turret and multi-spindle machines, as well as a new module called Solid Probe.

Delcam FeatureCam 2013 R3 SP2  Software

Posted by scutter at July 3, 2013
Delcam FeatureCam 2013 R3 SP2

Delcam FeatureCam 2013 R3 SP2 | 1.8 Gb

Delcam launches the 2013 release of FeatureCAM feature-based CAM software. This will offer a new series of options for three-axis milling and enhancements in five-axis machining, plus improvements in the turning and mill-turn modules.

Delcam FeatureCam 2013 R1 SP3  Software

Posted by scutter at Dec. 7, 2012
Delcam FeatureCam 2013 R1 SP3

Delcam FeatureCam 2013 R1 SP3 | 1.4 Gb

Delcam launches the 2013 release of FeatureCAM feature-based CAM software. This will offer a new series of options for three-axis milling and enhancements in five-axis machining, plus improvements in the turning and mill-turn modules.